First you want to select the fabric and trim that you want to decorate your clipboard with. You will not need much. Make sure you have enough for the back and to turn up around the edges for 1 1/2". You will need at least 3 inches of extra fabric at the top of the clipboard.
Other supplies that you will need are scissors for fabric, scissors for paper, scrapbook paper and card stock. Clipboard, glue Mod Podge, and we may find we need a few other things as we go along.
Iron the fabric you selected. I rarely prewash, unless the fabric I pick is from my stash & was purchased during my "prewash when I walk thru the door with the new purchase" phase. But you do need to steam out any folds or wrinkles.
Add a few drops of water to your glue. But not too much.
With paint sponge, paint the glue onto the back of the clipboard.
Quickly position your fabric. Before you get to this point, you do need to consider a few things. The design of your fabric, who it is for, etc. This clipboard is for DD's piano teacher. I want to make sure a piano shows on the back. I also like to cut the fabric on the bias. But I do not do a lot of pulling and tugging to the fabric b/c it distorts design.
The diluted glue is forgiving to work with, so if you need to pull it off and do it again, you can. :D Don't do it too much though, clipboards are made of chipboard or something like that....
Using a boning tool or a straight edge (I am using a pencil) quickly rub all the wrinkles and air bubbles out of the fabric.
The diluted glue is forgiving to work with, so if you need to pull it off and do it again, you can. :D Don't do it too much though, clipboards are made of chipboard or something like that....
Using a boning tool or a straight edge (I am using a pencil) quickly rub all the wrinkles and air bubbles out of the fabric.
Clip some of the bulk out of the corners, put some glue around the edge of the clip board and
bring the corners in. Center the corner in first, then miter the rest of the fabric in and trim.
bring the corners in. Center the corner in first, then miter the rest of the fabric in and trim.
You will need a straight edge blade or zato knife to trim around the clip area.
You will need to get as close as you can. Mod Podge this area. It will keep it from fraying. And if you have any uncovered clipboard at this point, and it bothers you, just get some matching craft paint and cover it. No on will know but you. Then Mod Podge when dry.
I prefer flat embellishments on the back of the clipboard. I have made several. And bumpy stuff anoys me. This is grosgrain ribbon. You can use anything you have on hand.
Another thing to have on hand for this project is fabric glue. It is permanant and will not come off of almost anything so be careful where, when and with who you use it. (Ask me how I know?) Some fabrics and trims have sizing, or are made of polyester that Elmers and mod podge will not work on. Fabric Glue will work and work very well. It is not forgiving. So make sure you use it quickly and know exactly where you want it. No second chances.
While your fabric on your clipboard is drying, select your photos, crop and frame them on scrapbook paper.
After the fabric is dry, add a piece of card stock onto the top of the clipboard by painting the top of the clipboard with more of the slightly diluted glue. You may also have to use a boning tool or pencil to rub out any bubbles, etc.
Crop, glue and frame your photos with scrap booking paper and scrap booking glue. (I prefer the glue over the zots and dots. Zots and dots leave space. You do not want that. Then arrange your photos.
Using mod podge, paste the photos onto the top of the clipboard.
Because my clipboards get a lot of use and abuse, I Mod Podge the front and back. This preserves the photos and if 'stuff' gets onto the fabric, it just brushes off. (I got plaster of paris on one once. Did not realize it until it was dry. Brushed right off!)
Add any other embellishments that you desire. You can really get fancy with these. But I like them more simple. Silk flowers do tend to fall off. I do like to tie fancy yarn and ribbon in the clip portion of the board. They last forever.
Lovely gift for my daughter and for my daughter's piano teacher.
It is really very simple and fun. You can get carried away making them and they really hold up. Y'all make some and if I figure out how to do a Mr. Linky, I will do a Mr. Linky when I get back and we can share. :D
Next week, when I get back from my Smocking Arts Guild Convention, I will do the tutorial on the matching pencil cup.
Lovely gift for my daughter and for my daughter's piano teacher.
It is really very simple and fun. You can get carried away making them and they really hold up. Y'all make some and if I figure out how to do a Mr. Linky, I will do a Mr. Linky when I get back and we can share. :D
Next week, when I get back from my Smocking Arts Guild Convention, I will do the tutorial on the matching pencil cup.
